Although we use our bathrooms often, some people make an effort to thoroughly inspect them. However, you need to inspect all parts from time to time and fix or replace any damaged parts before a minor issue ends up being a major one. When it comes to home improvement items, an ounce of prevention is worth a pound of cure.
Where to Look in Your Bathroom for Possible Water Damage
The bathroom’s constant use of water makes it especially sensitive to moisture buildup and subsequent water damage. However, you can stop water damage by inspecting it frequently. Below are a few areas to check out for water damage in your bathroom.
Walls
Check for any problems with the paint or wallpaper. To begin, run your hand along the wall, looking for any signs of moisture. Any dampness behind the wall could suggest a leak, which needs to be inspected even more.
After that, check if the exhaust fan is functioning correctly. If the fan turns slowly because of accumulated particles, clean it using compressed air from a can. Obviously, if the fan stops working, repair it immediately because your exhaust fan is your best defense against moisture damage.
Shower or Bathtub
Look for mold in the grout or lose pieces of the grout. As soon as possible, repair any places where the grout has fallen away. Next, inspect the showerhead and fixtures to ensure they remain in good working order and free of rust or lime buildup. Make a note of any tile damage and examine the drain attentively. Finally, make sure the shower door seals firmly and doesn’t leak water onto the floor.
Toilet
The toilet is a little difficult because the area is limited, but get your flashlight out and carefully check the area surrounding the fittings and on the back of the tank for any indications of dampness. Also, inspect the tank for any leaks at the point where the tank joins the base. Visit water damage Woburn to know more.
A susceptible water junction is a toilet. Check out the water lines for leaks near the toilet seat, hose, and below the water tank. Check the toilet rim and tank seals for leaks if there are any traces of moisture on the floor around the toilet. Keep in mind that deodorants that are hung from the toilet bowl can cause clogs.
Bathroom Vanity
If you have a leak, pay special attention to the cabinet’s interior because it’s the best place for mold to develop. Check out the seals around the basin carefully and replace any that are damaged right away.
If not handled quickly, a slow drip can cause far more damage than you would know. If significant damage has already happened, your best solution is facing the bullet and getting a new bathroom vanity cabinet. In most cases, it’s more convenient than cleaning and repairing an existing cabinet.
Pipes
Because most pipes lie inside the walls, indications of water damage are hard to discover. However, pay special attention to wetness and stains on the flooring and walls, as they might indicate a hidden plumbing problem. Check the humidity levels in adjacent areas too. Visit PuroClean Wakefield for more information.
Conclusion
So, look for any traces of moisture or water damage in the bathroom’s flooring and walls to see any sign of water damage. If you discover some warping or staining, speak to a professional to make sure there isn’t a leak.
Also, do not limit your search to the bathroom. Instead, go into the spaces that share the bathroom’s walls. The damp area might occasionally go through the opposite side of the wall, however, the problem is caused by a leaking bathroom pipe.
Bathrooms are among the most usual places subjected to regular water abuse and a high risk of water damage. However, the cost and damage can be minimized if you follow these easy procedures to prevent water damage.
