The most common type of mold you’ll discover in your home is mold in the basement. The basement is underground and is often not as well established as the rest of the house, making it the ideal breeding place for mold. It’s usually a storage area with little heat, and it’s also a place where moisture can collect due to condensation on pipelines and even a leak. If you don’t keep an eye on the conditions, such as excess wetness and dampness, which are good breeding grounds for basement mold, mold can really grow in the basement.
How to Get Rid of Basement Mold
Mold in the basement is a typical issue in homes. When interior humidity is high and moisture from water leaks exists, mold grows. Mold can be identified by the existence of black specks on wet, water-damaged places. Here are some easy yet effective techniques to eliminate mold in your basement.
1. Wear protective clothing.
Wear protective clothing before starting. All are advised to wear a long-sleeved shirt, long trousers or overalls, boots, latex or workingman gloves that reach up to the forearm, cap, and a full-face respirator mask. Eye goggles will increase your safety even more. After wearing your protective clothing, you will be sufficiently protected from skin disorders, asthma, allergies, and eye irritations.
2. Find the source of the water leak.
Identify all possible entry points for water and get them fixed or sealed. Possible causes include leaking flooring, ceilings from above, pipelines and water system leaks, and access sites during floods. In addition, water seeps in due to faults in the construction and poor maintenance. To find the source of water leaks, seek help from professionals or visit them here.
3. Identify all infested areas.
Locate all mold-infested areas in the basement. These are often seen on the backsides of paneling, wallpaper, carpets, and wood and wood products. Basement mold is likely to be present with no visible evidence of mold, but a moldy odor abounds.
4. Scrub the surfaces.
Scrub hard surfaces with a brush or scouring pad soaked in warm water and mild laundry detergent if mold shows up. Give time for drying. Then wipe the area with a home-remedy fungicide and wait 20 minutes. Repeat and wait for 20 minutes. Use a detergent solution that contains borate as one of its ingredients to clean the surface area. There is no need to rinse. Check out the other mold cleaning services here.
5. Spray some fungicide.
Fill a sprayer with fungicide and apply two coats to the basement’s walls, pipes, ceiling, and other mold-infested spots. Then, for one to two hours, immediately fan-dry the space to eliminate excess moisture.
Conclusion
When you discover that you have mold in your basement, the first thing you should do is figure out the source of the mold. For example, if you find leaks or excess moisture, you need to resolve the problem right away to avoid the moisture from returning and the mold from spreading.
Then you’ll need to take care of basement mold removal. Mold removal can be achieved with a variety of sprays and cleaners offered on the market. You must make sure that the area is thoroughly dry after cleaning to avoid basement mold from returning.
